How to Use Cruise Control in Honda City?
Cruise control is a great feature to have in a car since it can allow you to drive without worrying about surpassing the speed limit.
However, turning on cruise control in some cars is not as intuitive as in others.
So, if you just got a hold of a Honda City, you may be wondering, how in the world do I use the cruise control?
To use the cruise control in the Honda City, you need to press the cruise control button, accelerate to your desired speed, and then press the “SET” button. If you activate the cruise control correctly, the cruise control light will appear on your dashboard.
In this article, I will define cruise control and give you the steps for using cruise control in a Honda City.
Then, I will explain some of the basics of using cruise control in a Honda City, such as how to increase and decrease the set speed.
I will end this article by discussing the benefits of cruise control and whether it is dangerous.
What Is Cruise Control?
Before learning how to use cruise control in your Honda City, let’s go over what cruise control is.
Basically, when you activate cruise control, your car “cruises” at a specific speed.
So, for example, if you are driving at 50 mph when you turn on cruise control, your car will continue to travel at 50 mph without you having to touch the gas pedal.
3 Simple Steps to Use Cruise Control in a Honda City
Luckily, using cruise control in the Honda City is pretty simple.
All you need to do to engage cruise control is follow the steps below.
Step One: Press the Cruise Control Button
On your steering wheel, you will find a button on the right-hand side that says “CRUISE.”
Before you can use cruise control, you will need to press this button.
Step Two: Accelerate to Your Desired Speed
Now that you’ve turned the cruise control function on, you need to accelerate to your desired cruise speed.
And make sure your speed is above 25 mph (40 k/ph), or the cruise control won’t engage.
Step Three: Press the SET Button
On your steering wheel, underneath the “CRUISE” button, you will find another button that reads “SET.”
Press this button, and your car will maintain its speed.
How Do I Know if Cruise Control Is On in a Honda City?
If you have successfully engaged the cruise control in your Honda City, the cruise control light will show up on your dashboard.
Typically, the cruise control light will look like a green rectangle with the words “CRUISE CONTROL” inside.
How Can I Turn Off Cruise Control in a Honda City?
There are a few ways you can turn off cruise control in a Honda City.
For one, you can simply press the brake or the clutch.
And as soon as you do so, cruise control will turn off, and your car will deaccelerate.
Another option is to push the “CANCEL” button next to the “SET” button, which will immediately turn off cruise control.
Or, you can press the “CRUISE” button to end cruise control.
Can I Accelerate When I Use Cruise Control in My Honda City?
Yes, you can accelerate when using cruise control in your Honda City.
All you have to do is accelerate as you normally would, and then when you take your foot off the gas pedal, you will return to your cruising speed.
Can I Change the Cruising Speed in My Honda City?
Yes, you can change the cruising speed in your Honda City.
And you have a few options when it comes to both speeding up and slowing down.
How to Increase Cruising Speed in Honda City
One easy way to increase cruising speed is to press and hold the button on your steering wheel that says either “RES” or “ACCEL.”
When you press this button, your car will speed up.
Then, once you’ve reached the speed you want to cruise at, just release the “RES” button to maintain that speed.
Or similarly, you can tap the “RES” or “ACCEL” button to speed up your car.
This option is best if you want to raise your speed by small intervals because each time you tap the button, your speed will increase by 1 mph (1.6 k/ph).
Finally, you can simply press on the gas pedal until you reach your new desired speed.
When you get to the speed you want to cruise at, just press the “SET” button to maintain your speed.
How to Decrease Cruising Speed in Honda City
Decreasing the cruising speed is similar to increasing the speed.
One way to decrease cruising speed is to press and hold the “SET” button until you get to the speed you want.
Once you’ve reached your desired speed, simply let go of the “SET” button.
Or, if you want to decrease your speed in small increments, you can tap the “SET” button.
Because each time you press the “SET” button, your speed will decrease by 1 mph (1.6 k/ph).
Lastly, you can press the brake until you have deaccelerated to your desired speed and then press the “SET” button to maintain that speed.
Benefits of Using Cruise Control
For most people, the main benefit of using cruise control is to keep from speeding.
When driving, especially for long distances on an open highway, it can be easy to end up going faster than you intended.
And, of course, driving too fast puts you at a higher risk of a deadly accident and can easily get you a speeding ticket.
Thus, drivers put on cruise control to avoid these issues.
Additionally, cruise control can help with driver fatigue, especially on long trips.
When you don’t have to keep paying attention to how fast you are going, you give your eyes and mind a bit of a rest, which can make you feel alert for longer.
Finally, cruise control helps you save gas.
When you accelerate and deaccelerate, you burn gas at a higher rate than if you were cruising at a specific speed.
In fact, using cruise control helps you improve your gas mileage by an average of 17%.
Is it Dangerous to Use Cruise Control?
Overall, cruise control is not dangerous.
However, cruise control can become dangerous if you do not use it correctly.
So, for example, you should always keep your foot on the pedals when using cruise control.
If you do not, you will have a reduced reaction time, meaning it will take longer to hit the gas or brake pedal.
Additionally, some people find that using cruise control makes them pay less attention to the road.
If you feel like you have a tendency to zone out when using cruise control, you should not use it.
And lastly, you should never use cruise control in the rain because doing so can cause your car to hydroplane.
Conclusion
To use cruise control in a Honda City, you need to press the “CRUISE” button, accelerate to your desired speed, and then press the “SET” button.
And make sure that when you use cruise control, you do so responsibly so that you do not harm yourself or other people on the road.
Table of Contents
- What Is Cruise Control?
- 3 Simple Steps to Use Cruise Control in a Honda City
- How Do I Know if Cruise Control Is On in a Honda City?
- How Can I Turn Off Cruise Control in a Honda City?
- Can I Accelerate When I Use Cruise Control in My Honda City?
- Can I Change the Cruising Speed in My Honda City?
- Benefits of Using Cruise Control
- Is it Dangerous to Use Cruise Control?
- Conclusion